Full Pioneer Service - £50 per deck

  • Full Update of System Software (if needed)
  • Blow out all of the accumulated dirt and debris from unit
  • Clean the PCB (Printed Circuit Boards) using a chemical cleaner bath
  • Disassemble the laser lens assembly and professionally clean the laser lens using factory PIONEER cleaner and cleaning cloths
  • Lubricate the lens drive motor as well as the CD insert / eject mechanism
    using factory PIONEER supplied lubricants
  • Clean out all control switches and rotary variable resistors
  • Re calibrate the master tempo (Pitch) to factory recommended setting
  • Clean and de oxidize all RCA signal outputs - Analog & Digital
  • Reassemble the unit and thoroughly test each function via factory SERVICE mode checking the following areas
  1. Checking & Updating software for MAIN / SUB / DRIVE
  2. Check and report error history
  3. Check all control buttons and display functions
  4. Checking load on JOG dial
  5. Checking operation of player simple substance in " Player" and "Test" modes

Mixer full service:

  • Clean all the accumulated dust, gunk, and debris
  • Clean all the PCBs (Printed Circuit Boards) & Power Supply with Cleaner/De greaser
    This removes all oxides and smoke particulates which form and deposit on the diodes / transistors /ICs / logic chips
  • Clean and re lubricate all rotary fader knobs & switches (trim,bass,mid,treble,mic,effect, phono/line,headphone,etc...)
  • Tightening of all Rotary Knobs
  • Clean & de oxidize all the inputs & outputs including:
  1. Headphone
  2. RCA Phono / Line inputs
  3. RCA + 1/4" + XLR - Master / Record / Booth Outputs
  4. Mic inputs